Nova Grip
MTH clamping plates of the Nova-Grip series are drop-forged from C45 + N and assembled using screws of strength class 10.9 HV or 8.8. Installation must be carried out in accordance with the building authority approval. Thanks to the easily detachable clamping connection, the MTH clamping plate offers a cost-effective fastening solution. We offer the Nova-Grip clamping plates in 10 different versions, providing a solution for every common application.
Clamping Plates with Approval
Material: C45N in electro-galvanized or hot-dip galvanized finish with DiBt approval for dynamic loads.
| Article Number | Limit Tensile Force 4 Screws at 0 kN Shear Force * | Limit Shear Force 4 Screws | Clamping Range -/+G | Tightening Torque | ||||
| Galv. Zinc Plated / Hot-Dip Galvanized | 8.8 in kN | 10.9 HV in kN | 8.8 in kN | 10.9 HV in kN | From / To in mm | 8.8 Lightly Oiled in Nm | 10.9 in Nm | |
| Clamping Plates Nova Grip M10 | 1000/1011 | 17.8 | 30.4 | 3.6 | 6.1 | -6 to +10 | 40 | 60 |
| Clamping Plates Nova Grip M12 | 1001/1008 | 24.7 | 33.6 | 5 | 6.7 | -6 to +14 | 75 | 85 |
| Clamping Plates Nova Grip M12 LA | 1002/1027 | 14.8 | - | 3 | - | -4 to +13 | 65 | - |
| Clamping Plates Nova Grip M16 | 1004/1009 | 42 | 75.2 | 8.2 | 15 | -7 to +17 | 160 | 160 |
| Clamping Plates Nova Grip M16 RF | 1005/1029 | 33 | - | 6.6 | - | -6 to +17 | 160 | - |
| Clamping Plates Nova Grip M20 | 1006/1010 | 55.1 | 95.5 | 11 | 19.1 | -11 to +23 | 290 | 350 |
| Clamping Plates Nova Grip M24 | 1007/1028 | - | 134.8 | - | 27 | -10 to +23 | - | 500 |
| Clamping Plates Inova M16 ZW | Only Galv. Zinc Plated 1039 | 44.6 | - | 9 | - | +5 to +17 | 180 | - |
| Article Number | Dimensions in mm | |||||
| Galv. Zinc Plated / Hot-Dip Galvanized | a | b | c | d | l | |
| Clamping Plates Nova Grip M10 | 1000/1011 | 36 | 32 | 16 | 13 | 20 |
| Clamping Plates Nova Grip M12 | 1001/1008 | 43 | 38 | 19 | 17 | 23 |
| Clamping Plates Nova Grip M12 LA | 1002/1027 | 53 | 38 | 19 | 25 | 23 |
| Clamping Plates Nova Grip M16 | 1004/1009 | 57 | 50 | 25 | 20 | 30 |
| Clamping Plates Nova Grip M16 RF | 1005/1029 | 80 | 50 | 30 | 38 | 30 |
| Clamping Plates Nova Grip M20 | 1006/1010 | 71 | 63 | 31 | 25 | 38 |
| Clamping Plates Nova Grip M24 | 1007/1028 | 86 | 76 | 38 | 30 | 43 |
| Clamping Plates Inova M16 ZW | Only Galv. Zinc Plated 1039 | 57 | 50 | 25 | 22 | Incl. Washer 36 |
*Limit tensile force and limit shear force are interdependent. Intermediate values can be found in the detailed load values in the “general building authority approval” here.
Custom Solutions
Clamping Plates Nova Grip M12 LAS with an extended pressure arm for deeper clamping into the flange and an increased support arm.
10.9 HV Verbindungsaufbau
8.8 Verbindungsaufbau
Accessories for Clamping Plates:
Spacer Washers
Material: ST235, electro-galvanized, approved by DiBt for dynamic loads.
| Article Number | Increase Clamping Range | a | b | c | Ød | |
| Spacer Washer M10 | 1041 | +5mm | 35 | 40 | 5 | 11 |
| Spacer Washer M12 | 1042 | +5mm | 35 | 40 | 6 | 14 |
| Spacer Washer M16 | 1043 | +5mm | 44 | 55 | 8 | 18 |
| Spacer Washer M20 | 1044 | +5mm | 48 | 70 | 9 | 22 |
A maximum of 3 spacer washers can be used per clamping plate. This increases the clamping range by +15 mm.
You can find the determination of the screw length under “Service”.