Nova Grip clamping plate
MTH Nova Grip clamping plates are drop forged of C45 + N and assembled using 10.9 HV or 8.8 screws. Assembly must comply with the relevant building supervision authority permit. The connection can be undone at any time. This makes MTH clamping plates an economical form of connection. We can supply Nova Grip clamping plates in 10 variants. They can thus be used for any normal purpose.
Clamping plates with certification
Material: C45N in electrogalvanised or hot galvanised form with DiBt certification for dynamic loads
| Article number | Tensile force limit, 4 screws at 0 KN shear force * |
Shear force limit, 4 screws at 0 KN tensile force * |
Clamping range -/+G | Torque moment | ||||
| electrogalvanised/hot dip galvanised | 8.8 in kN | 10.9 HV in kN | 8.8 in kN | 10.9 HV in kN | from/to in mm | 8.8 oiled in Nm | 10.9 in Nm | |
| Nova Grip M10 clamping plates | 1000/1011 | 17,8 | 30,4 | 3,6 | 6,1 | -6 to +10 | 40 | 60 |
| Nova Grip M12 clamping plates | 1001/1008 | 24,7 | 33,6 | 5 | 6,7 | -6 to +14 | 75 | 85 |
| Nova Grip M12 LA clamping plates | 1002/1027 | 14,8 | - | 3 | - | -4 to +13 | 65 | - |
| Nova Grip M16 clamping plates | 1004/1009 | 42 | 75,2 | 8,2 | 15 | -7 to +17 | 160 | 160 |
| Nova Grip M16 RF clamping plates | 1005/1029 | 33 | - | 6,6 | - | -6 to +17 | 160 | - |
| Nova Grip M20 clamping plates | 1006/1010 | 55,1 | 95,5 | 11 | 19,1 | -11 to +23 | 290 | 350 |
| Nova Grip M24 clamping plates | 1007/1028 | - | 134,8 | - | 27 | -10 to +23 | - | 500 |
| Inova M16 ZW clamping plates | only electrogalvanised 1039 | 44,6 | - | 9 | - | +5 to +17 | 180 | - |
| Article number | Dimensions in mm | |||||
| electrogalvanised/hot dip galvanised | a | b | c | d | l | |
| Nova Grip M10 clamping plates | 1000/1011 | 36 | 32 | 16 | 13 | 20 |
| Nova Grip M12 clamping plates | 1001/1008 | 43 | 38 | 19 | 17 | 23 |
| Nova Grip M12 LA clamping plates | 1002/1027 | 53 | 38 | 19 | 25 | 23 |
| Nova Grip M16 clamping plates | 1004/1009 | 57 | 50 | 25 | 20 | 30 |
| Nova Grip M16 RF clamping plates | 1005/1029 | 80 | 50 | 30 | 38 | 30 |
| Nova Grip M20 clamping plates | 1006/1010 | 71 | 63 | 31 | 25 | 38 |
| Nova Grip M24 clamping plates | 1007/1028 | 86 | 76 | 38 | 30 | 43 |
| Inova M16 ZW clamping plates | only electrogalvanised 1039 | 57 | 50 | 25 | 22 | incl. disc 36 |
*Tensile force limit and shear force limit dependent on one another. Interim values are in the detailed load values [612]in the “general general building authority approval".
Special solutions section
- M12 LA and M16 RF clamping plates with extended contact piece for clamping deeper in a flange
- Nova M16ZW clamping plates with concave added disc and twist prevention
- Nova Grip M10/M12/M16 clamping plates are available in A4 stainless steel but with different load limits
Clamping plates without certification
Material: C45N in electrogalvanised or hot dip galvanised variants for static loading
| Article number | Tensile force limit, 4 screws at 0 KN shear force * |
Shear force limit, 4 screws at 0 KN tensile force * |
Clamping range | Torquemoment | |
| 8.8 oiled in kN | 8.8 oiled in kN | from/to in mm | 8.8 oiled in Nm | ||
| Nova Grip M8 clamping plates | 0999/1031 | 8 | 1,6 | -6 to +10 | 7,2 |
| Nova Grip M12 LAS clamping plates | 1003/1019 | 14,8 | 3 | +18 to +23 | 65 |
| Article number | Dimensions in mm | |||||
| a | b | c | d | l | ||
| Nova Grip M8 clamping plates | 0999/1031 | 36 | 32 | 16 | 15 | 21 |
| Nova Grip M12 LAS clamping plates | 1003/1019 | 55 | 38 | 20 | 28 | 38 |
*Tensile force limit and shear force limit dependent on one another. Interim values are in the detailed load values [612]in the “general general building authority approval".
Special solutions section
- Nova Grip M12 LAS clamping plates with extended contact piece to clamp deeper in flanges and with higher contact pieces
| 10.9 HV clamping | 8.8 clamping | German | English |
 |
 |
Sechskantschraube Scheibe Scheiben Klemmplatte Verbindungsplatte Sechskantmutter Distanzscheibe (optional) |
Hexagonal screw Disc discs Clamping plate Connecting plate Hexagonal nut Spacer disc (optional) |
Clamping plate accessories:
Spacer discs
Material ST235, electrogalvanised, certified by DiBt for dynamic loads
| Article number | Extension clamping range |
a | b | c | Ød | |
| Spacer disc M10 | 1041 | +5mm | 35 | 40 | 5 | 11 |
| Spacer disc M12 | 1042 | +5mm | 35 | 40 | 6 | 14 |
| Spacer disc M16 | 1043 | +5mm | 44 | 55 | 8 | 18 |
| Spacer disc M20 | 1044 | +5mm | 48 | 70 | 9 | 22 |
- Maximum 3 spacer discs per clamping plate. This changes the clamping range by +15 mm.
Screw lengths are given in "Service"
Our general building supervision authority permit as a PDF file: 
